I have a Neumann tlm 103, and was wondering if anyone knew about cleaning the diaphram. I was told by a local dealer here in san diego that Neumann will go through the mic and bring it back up to specs n all for $100.00. I'm not worried yet, but a decent ammount of dust is begenning to collect on the electrostatic diaphram.

I dont know if this is the irgh forum, but i figured i would ask.

I have an alvarez with the 600t electronics, which allows for the addition of an internal microphone. The input for the mic is a basic mini jack on the ybderside of the electronics. The unit does not provide phantom power, so it would have to be a Dynamic, or condensor with its own inline power...

Alright here's the deal. As some of you know, i've recently bought an ISA 428. I've also upgraded the entire studio to mogami cables.( my wallet is hurting from the cables. ) Now i'm looking to buy a good vocal mic for Rap and also some R&B Vocals. I'm current;y using a RODE nt1000 for my main vocal mic.

I have an Oktava MKL5000 and I've changed the valve several times. I have a further ten on their way from Ukraine that I want to try. Now with this particular mic, the 'skeletal' structure must be tightly screwed to tracks on the main circuit board, but after opening the mic so often, these tracks are worn away. Now I've decided to rebuild the main circuit board.

I'm very curious about this mic. Over here it is not too expensive -one of the few audio products that is cheaper in Europe. I'm very curious about the M7 capsule that MG uses, especially in this case, as it's a solid-state mic. Opinionswould be much appreciated.

I am looking for a new drum mic preamp and possibly mics, so I have lately been very interested in transient response. The question came to my mind (albeit more theoretically interesting than practical), what microphone/preamp combination would do the best job of passing a square wave?

Any thoughts?

As a part of some technical project I need to record sound (speech) on a PC from 6 wireless microphones. Is there a PC sound card that can I use? What microphones? Any recommendaitons or links to the relevant web sites are appreciated.

Thanks.

Hi,

Does anyone have the RODE K2, and what ere your experiences with it ? How does it sound ?
Maybe you did replaced the tube (which tube is it stocked with? ), and how did that affect the sound ?

Thank you very much in advance.

Nicky.

how do the RODE NT5 condensers fare as drum kit overhead mics?

Has anyone recorded acoustic guitar with a RODE NT1000? Any experiences?

I've tried a little (RODE into Digi002 rack) but it sounds awful.

Any tips on mic position, what kind of room, eq tips?