I'm not really sure where to go next with this mix. I can tell it's missing something or a few things just don't sound quite right. Though, after listening to it so many times i've become numb to it. Some new opinions might help! I'm open to any suggestions.

Hi,
I recorded someone speaking for 30 seconds. I recorded them live with a Zoom H4N Handy Recorder. I have a .wav file with background noise for one second and two beeps in the background. I would like to hire someone to eliminate the noise.
I hope this is the correct place to post this.

Thanks in advance,
Kidd Black
Paris, France

Okay so i realize that i probably should not have the monitors up that load when recording Direct in bass because I can hear the song come through and it is causing problems with my mix. I'm having some crackling and other issues. I have Izotope RX2 and i'm wondering if there is anyway of getting rid of the background song withough ruining the bass track, or without having to re record.

http://soundcloud.c…"]Puzzles VA's sounds on SoundCloud - Create, record and share your sounds for free[/]="http://soundcloud.c…"]Puzzles VA's sounds on SoundCloud - Create, record and share your sounds for free[/]

In a properly wired DI box, the shield of the unbalanced connection is wired to pin 1 of the XLR. Since the shield is signal-bearing, this would induce a voltage over pin 1 of the XLR line. A ground lift switch breaks this connection, but why would you want it to begin with? Wouldn't you always want your ground to be at 0V, and not carry a voltage during normal operation?

hi again, heres an ambient track I'm working on, anything to adjust/fix or ready for mastering?
thanks

I purhcased a ART Pro Channel a couple of years ago off ebay. Worked for a little bit, but now it stopped working. I'm trying to figure out if it's a tube. The unit powers on, I hear slight audio distortion on the output. Is there something you can do to test the tubes or is it something else?

Has anyone used Sonar with the VS 700C in a hybrid application (full integration between hardware and software)? Is this DAW exclusive to ITB or does it have a nice workflow OTB too?
If I got the VS 700C, do I need to use their interface/ ADDA for it or can I use my interface and converters?

Hi guys, I'm new to recording and I just got my first audio interface, a Tascam US-1800, and a new, really nice laptop from ADK with plenty of memory, fast processor, all that, so I know my problems aren't a lack of power.

Howdy. I have an opportunity to pick up one of these (around 2002 or maybe 2003 model) for a very decent price.