Hi,
I am building an LA2a from the book "HOW TO BUILD A TUBE COMPRESSOR". I have one question through. On the C 7a-d, it appears as though he has replaced the can with four 47uF @450V electrolytic caps on the drawing. However, these caps are run to the C7a-d Can. But if you are replacing the C7a-d can with the four caps you wouldn't have the can.
HELP

Hey People.

Thanks for letting me post: Sorry I'm not sure I'm even in the right area

for this. please don't flame me.

I am in desperate need for a 'copy...of a Roland PC200 mkII midi controller

manual. I bought one off ebay, but they didn't have one...I went to Roland

and Edirol, and they don't have one either. I'd appreciate if someone

I could be out of line in my posting topic...I do apologize.

I don't know where else to put it...but

I need a manual for a Roland PC200mkII...does
anyone know where I could get a copy?

I would be indebted...

Thanks

Vern

I could be out of line in my posting topic...I do apologize.

I don't know where else to put it...but

I need a manual for a Roland PC200mkII...does
anyone know where I could get a copy?

I would be indebted...

Thanks

Vern

Heelo, does anyone know where we can get a power supply for an allen & heath SR8 mixer ? Doesn't have to be original equipment, anything that works.

Thanks!

Hi, I have a job coming up and I need info on this model of soundboard. I've searched the Yamaha website and haven't found anything but software update specs. Any help would be appreciated, of course!

Sorry to bring up this summing stuff again.

I'm curious. Has anyone attempted to build their own summing bus? The ones on the market (Dangerous 2b, Manley, Folcrum) are pricey. If you can build one for a $30 bucks why not try it. Below are some links for DIY summing mixers. I can solder a cable but Idon't know squat about building a circuit.

Ok, so I know nothing about fixing electronics. I mean, I can fix a computer if there's bad parts and stuff, and i'm good with computers, but I don't know anything about soldering or wires or power supply's or anything.

For a Sony TCD-D10 portable dat recorder.
Thanks,
Caine

I recently bought an old Allen & Heath System 8 1616, sixteen track mixer for decently cheap because it didn't have a power supply. After asking around online I figured it would be about $100 to $200 to either buy a replacement or have one built, the schematics are available.