Hi all,

I'm repairing a couple of 7602 MkIIs, each with their own problems. Does anyone have experience with those or maybe even have access to a schematic or service manual? I have looked at some Neve 1073 schematics, since it's supposed to be a clone of those, but there seem to be enough differences outside of the tone circuitry that they're not terribly helpful.

Anyone know of a flange or some sort of adapter that turns these cheap 5-pin din d-sub connectors:

into a d-series connector that I can attach to a rack panel like this:

Hello Everyone,
I'm brand new to the forum so be gentle. I hope I'm in the correct area to asked this question.
I have a powered monitor and it powers up, and sound comes out, but the volume is very low and it is distorted. How can I determine if the problem is the speaker or the amp?
If it's the amp, what would be the most logical problem.

Well I turned on the ole studio last weekend. I thought a felt a tingle when plugging in a patch cord to my mixer.
At first I thought I imagined it. Then my lips got zapped through the mic. That I didnt imaging.
I also realized that I got a shock when handling the main outs from my mixer to my power amp.
And the chassis of the amp itself was energized.

So I was so interested in the 1612 Tubes I got to play with... I started a hybrid design. The concept is a vari-mu style compressor using the 1612 as the front end after a Jensen XFMR. I am thinking of then running LA2 style buffer and driver amplifier into a Jensen output XFMR. But the side chain will be solid state and use either a LOG amp or a THAT audio engine..

This question pertains to something mentioned in the thread over here: in-need-of-a-power-supply-for-a-Alesis

Hi, my left stereo channel of the Zoom H6 capsule started with buzz sounds than it got worse with a hiss sound, then I opened it and realized that the cables was detached like in this picture I took today when I disassembled it.

can you tell me how to solder it please? If you can draw on the picture where to exactly solder the 2 cables I would be really grateful

thx a lot

I’m looking for a spare Yamaha 03D ST IN (Stereo In) Gain Pot (aka Rotary Variable Resistor - Ref no. VR901 - Part No. VV701300) or a compatible equivalent. Any idea?

I'm limited in room and money, so I cannot buy a complete used 03D to cannibalize.

Thanks!

A tech is currently refurbishing my Yamaha 03D console, whose ergonomics, MIDI implementation and built-in effects I love (I'm more creative with this old console, which I can play like a synth to create crazy sounds, than with newer ones).

Onto the beutiful blast from the past in need of some serious TLC...