Skip to main content

how to get the sound to the pc

Hi,
What's the best way to get a recording to software like cubase?

Firewire?
USB?
Sound Card?

Highest bit rate with least noise counts as "best" i think... although do let me know if what i've just said is stupid :?

I would like to produce somthing in 24bits 96k quality as that seems to be what people are mentioning and going for.

Toft Audio Designs ATC-2 questions

I've been looking the Toft Audio Designs ATC-2 for a while, reading, researching...but the only info i found was the Fletcher's rewiew on Mercenary...i'm interested onto hear a comentary or rewiew (Kurt?) of this device...looks like its a good deal...what about the EQ? compresor? better than the RNC? and the pre?

Sebatron - inside and outside - screws and solder and things

I took the top off my VMP-4000e a little while back, and was quite impressed with the construction of the thing. Everything is nicely dressed - heat shrink pretty much everywhere it could be used - glass/epoxy PCB - just a nice looking rig inside. There is obviously a lot of time and care in putting these things together.

Can UAD-1 Plugs run "Natively" in a second PC?

Hello,

I have 2 PC's I use for Audio. One is located in our band's "Live Room" (where we practice, and record raw tracks), and my Tower PC at home (for mixdown, etc). The 2 would NEVER be in use at the same time, and are a 20 minute drive apart from each other (if that affects the EULA of the UAD-1 software).