Hey I am always looking for good articles on Drum Tuning for new perspectives I ahve never seen it dicussed here so what do yall got?

So I am wondering what happens to the pickup patter of a figure 8 mic if you 1. Lets say seal or duct tape the rear port or 2. you spilt the mic like you do for M/S but make it so you reverse the phase on the rear lobe so they now both have positive phase?

Do any of you have any experience with M-S recording using the Shure ksm44 as the bi-polar mic?
I read a review that said the response from the rear in that mode was "muffled and dramatically different" (see page two para 4, on below link).

I have been trying to find out how this unit sounds but so far all anyone talks about is how or how it don't work like... and most of that seem to be coming from people that are new to recording. We have one on order so I guess we will find out ourself sooner or later, but just courious.

Anyone know? I guess I should ask, "compared to the XT 20's".

:w:

DAWorld has been up for almost 7 months. "Computing" and "The Digital Cafe" are our stongest forums. Should we transfer them to Pro Talk and retire DAWworld or do you have hope for this area of RO?

Maybe we could merge all the forums into "Computing" and "The Digital Cafe" and keep DAWworld going. Start new forums by going in a different direction.

Hello,
I read a text about phase canselation in "Studio buddy" (Its a collection of small recording articles written by Michael Laskow and Alex Reed found here: http://www.studiobuddy.com )

Stuttering audio that just popped up in my setup.

Hi, I'm really down on my knees now, I've been trying to sort out why my comuter behaves the way it does and I feel I've been trying everything (almost). Please bear with me.

My system: Dell PIII450, 384 MB (PC100) RAM, 13GB IDE system disk, 20GB IDE audio disk. Win 98 is used. Maxi Studio ISIS sound card with ASIO drivers.

I am using a K2500, and I notice there are intermitant clicks or glitches.

I am looking at uprading my current DAW setup but there are so many factors to consider since the tecnology is changing so fast . I am currently running :

MAC 9500/G3 400
OS 8.6.1
Pro Tools 5.0
Pro Tools III Hardware ( 32 Track )
(5) DSP Farms
(4) 882 I/0
Miro DC30+

Remember how I want to add effects to a VSTi and record it without getting the feedback loop. Someone told me of a Berhinger mixer that will allow me to do that. Right now I use the Mackie 1202 vlz. Apparently it has a separate busing system? Sorry, my friend told me about it so I know I'm vague.