We all know what it sounds like when we take two channels and pan them hard left and right and delay one track slightly.
If you are recording something in stereo and the converters are not tight does it cause a similar effect?

I just published this article on the LavryBlack AD11. Great for the mobile guys!
 

Hi there, I'm consulting for another person's setup. I'm having a little bit of a hard time finding something that will work for them (i'm not charging money or anything, more of doing it as a friend, so don't just make fun of me for not knowing what to look for, haha). Long story short, I use a mac setup, and use mac only software, Now my buddy uses a windows 7 pc with an m-audio 2626.

Hi there,

I'd like to take this time to introduce myself first, or rather explain my background. For those of you who wish to skip this crap, just skip this. I'll put a line break for ya :)

Hi all,

I'm trying to use a Marantz PMD661 without the SD card by plugging it into my PC via USB. However, every time I plug the USB cable in the words "USB Connecting" appear on the screen of the Marantz device and it doesn't go away. I let it sit like that for a good 5-10 minutes and nothing changed. Is it supposed to take longer or does this sound like an issue?

Looking to to do an upgrade...would love to go intel but AMD is really inviting, $ per performance.
Has anyone had good experience with AMD system?
If so what components seem to work.

Thanks!

Any comparisons between the three listed below, please share:

Prism Orpheus
Lynx Aurora
RME FF 800

I apologize in advance for my lack of technical knowledge, I will try my best :)

We have a old 12 Channel Yorkville mixer that runs 2 self powered Mackie Speakers in a Worship environment.

Right now, there is a delay switch wired in so that the mixer turns on first, then a half second later, the powered Mackie Speakers.

I recently acquired a good condition Tascam DP-01 Hard Disk Portastudio(40GB), not the FX Model. For the line inputs there is only to 1/4" jacks ( NOT XLR) ( WTF right?). So what cables or type of preamp would I need to record via my Condenser mic ( w/ 48v)? This is my portable studio not my home studio by the way.