I have a Yamaha MG24/14FX mixer and I want to link my Peavey MP 4 powered mixer to it so that I can have 4 extra channels. I still need to make sure I can control my monitors though and I need all of the sound from both boards to come from the same speakers that they would have originally. I am using a Yamaha p1600 power amp.

I've been searching for a cost and space effective solution to recording bass into my computer. I don't have a bass amp because I'm a guitar player...

i've been on a kick checking out power amps to run my subwoofers. so i've read up on a few things and here are some of the amps i'm considering to run 2 or 4 cheap subwoofers, each at an 8-ohm load.

Crown XTi4000
Crest VS1500 (if i use 4 subs i'll need 2 of these)
QSC RMX series

Hey guys diden't know where to post this so feel free to move it.

I am curious if anyone has done this with success. I have read the manual that comes with it and it states that you can plug the speaker tap from a tube amp directly into the amp input and put the switch to "speaker" mode and it will safely record amps up to 1700w and it doesn't matter what ohm tap you use from the output transformer's secondary.

I'm wondering if using a guitar or bass amp head would make a big difference when recording to my audio interface instead of plugging straight in. Plugging straight in sounds completely whack.

Hi guys,
I have a Blues Junior amp that does not have a line out .
It only has speaker and ext speaker outputs.

Hey. Im new in that forum. Im also total new to home recording. But recently i finally bought guitar I'm very happy with and i would like to start recording.
For now except my guitar i own Line6 SpiderIV guitar amp, Steinberg CI1 USB interface and a PC laptop. I also have Mixcraft5 software.

I have an Ampeg 112.

The speaker is shot.

How do I go about replacing it?

What are some good brands of speakers?

I have heard the eminances are good?

Never have done this before, any help is appreciated.

Thank you!

Hey guys, I recently build an isobox for my speaker cabinet so I can crank my tube amp without disturbing the neighbors too much the head amp I've been using it's most of the times just a couple of inches away from the isobox but now I want to move the head to where my control room is at witch is considerably a long distance.