I just recently purchased some things on ebay, I got an Audio-Technica at2035 and a Focusrite scarlette solo. I plugged them into my computer, installed all neccesary drivers and the scarlett powers on fine and is fully recognized no problem.

came across this in an ad in my email. I like how the guy describes what the parts do, in sound guy terms. It kinda lends a tonal characteristic to things like resistors, where I'm usually like HUH? This thing looks cool.

Yes, the mistake in Focusrite name was intentional ;)
I love my ISA preamps but this 56 was a pain from day 1, it went to the service center and return in the same condition.. At first it was just channel one, so I just accepted it to avoid loosing the unit 3months again...
Now the problem occurs on more than one channel so here's the cry for help !

For those who may be interested, here's a link to a recent SOS review of Focusrite's Clarett-8/Clarett 8X mic preamp/I-O (Thunderbolt):

Hi everyone,

I'm trying to set up a pair of Focusrite liquid channels with output via aes/ebu.as a stereo output.

I've got the document on the setup, but what I fail to understand how a/d output from the slave preamp
Gets chained into the master preamp and out the aes/ebu on the master preamp.

Hi all,

I've had an M-Audio Delta 66 w/ Omni IO breakout box for around 10 years.
The Omni IO went crap, a couple weeks ago, and I just replaced it with a Focusrite Saffire Pro 14.
I did some recording (AudioTechnica AT4033SE), on the new Saffire, and I had to crank the pre-amp up a lot higher than I did on the Omni.

I would appreciate your opinion on the Focurite Octopre MKII, mostly the sound quality.
I want to add more mic inputs to my setup. I already have a computer interface with optical I/O (MOTU 828 MKII) so I think the Octopre would do the job at the right price.
Because it is a newer design, I would use the Octopre clock to sync the 828MKII.

Thanks!

I whant to start some bass guitarr and some snare and kick samples, i dont have a studio but i have a fairly large rehearsal room with lots of mics most Shure57, my audio interface is a Focusrite 2i4, the rehearsal room have 2 mixing console 1 digital, Yamaha 01v96 and an analogic Behringermix console that i dont remmember the model,

So I just topped my credit card again, to buy a Mytek ADC 96
My plan is to connect my Focusrite ISA two to the Mytek, then the mytek to my Focusrite Liquid Saffire 56 via spdif.
I also have a Octopre which is connected to the saffire 56 via ADAT.

I read the Mytek has a good clock so I want it as the master clock.