okay i just moved to costa rica and i havent had my daw setup forever now. seems i forgot all the basics.

i have a Mackie cfx16 mixer and a delta 1010 breakout box version, and using using Cubase sx. i also have an 8 channel headphone amp that i have mostly for future use when i get more mics and such to record a whole band at a time?

I currently have a Big Ben master clock routing to my RME FF800.

My FX Processors dont have a dedicated WC input, so I assume I need to run my S/PDIF to my soundcard. However, is it critical that the soundcard would be a slave clock (from the Big Ben) or does it have to be a master?

Hey RO'ers, I have been working with PT for over a year and have fell in love with the software. My question is in regards to assigning inputs and outputs in the I/O Dialog box? I usa a few of the plugins that came with PT in damn near all of my sessions and was wondering how to go about assigning the paths to buses of the plugs that I use most often?

I have an E-MU 1820 Digital Audio System connected to my 2.8Ghz PC. It's connected with the thick cable that comes out of the back of the E-MU (ADAT?). I'm using a Shure KSM27 microphone and Im recording in an isolated room in the basement.

I just purchased a Ashly pqx 571 and I am running a delta 1010 a/d converter. I currently have the output of channel 8 running into the ashly and out ashly into the input on channel 6 of delta so that I can moniter and try to eq the track. I have the delta patchbay set up with 8 out and 6 in. I am getting sound but the problem is that it is a very low level.

I'm having no luck with my AP8 cards and O2R96. The Apogee manual isn't very indepth. I really want to rout my stereo bus and control room though the AP8-DA converters.
Can anyone give me some good advice?

P.S.
I Also can’t get my AP8-AD card to work.

hello everyone,

I am opening/building a new studio. Below is a rough diagram of the space. Here is my problem. .

hello everyone,

I am opening/building a new studio. Below is a rough diagram of the space. Here is my problem. .

I have a guitar rig that I use in various situations. It consists of a Pod Pro with a Lexicon MPX1 in the effects loop. I use this rig in both stereo and mono applications. It is set up for stereo, but I'd like a way to sum the outputs of the Pod for use in mono (into the pwr amp in of a tube combo). I'm hoping for some input on the following options:

Im using the onyx 1640. .i just brought a samson stereo headphone amp. i ran the headphone out in the 1640 to the headphone amp and i can only hear audio in one ear...i believe this has something to do with the stereo output.how can i fix this. .oh this is obviously a newbie question. thanks in advance