Skip to main content

I was wanting to know about recording drum triggers.Our drummer uses them live and wants to use them for recording,he uses an Alesis DM5 unit triggered by Roland acoustic drum triggers.My problem is i dont kno what to record?Should i record the MIDI or the audio coming off the DM5.I am told that if i use the MIDI i can replace the little parts like triplets that sometimes dont trigger correctly,which would be really nice but i am little unsure as how to do this in SONAR 4 P.E.?I know how to record and play back the MIDI tracks just dont know how to edit.Any help will be greatly appreciated.

Comments

Todzilla Tue, 06/07/2005 - 11:04

I've done it a number of ways. I found out the hard way that the best thing to do is just to record individual drums with the best side rejecting micing you can get. (this is in addition to overheads and possibly sweet sounding bleedier mics for acoustic sound).

Run triggering off the rejecting mic tracks. If need be, you can EQ the signal between track and Trigger input. This gives you many more options that trying to capture MIDI data up front where you have to commit to threshold, retriggering settings up front.

I found the above approach to be far superior to committing to triggering up front.

FWIW, I use 57s and mutt cardiod mics that ultimately feed an Alesis D4. I use the Neuman and Crown mics for the tasty overhead stuff. Sounds pretty good.

anonymous Thu, 06/09/2005 - 08:01

Todzilla wrote: I've done it a number of ways. I found out the hard way that the best thing to do is just to record individual drums with the best side rejecting micing you can get. (this is in addition to overheads and possibly sweet sounding bleedier mics for acoustic sound).

Run triggering off the rejecting mic tracks. If need be, you can EQ the signal between track and Trigger input. This gives you many more options that trying to capture MIDI data up front where you have to commit to threshold, retriggering settings up front.

I found the above approach to be far superior to committing to triggering up front.

FWIW, I use 57s and mutt cardiod mics that ultimately feed an Alesis D4. I use the Neuman and Crown mics for the tasty overhead stuff. Sounds pretty good.

Todd-----------------youve just answered some questions for me-------------------I really hate recording drum tracks-------dont get me wrong------I dont mind it----but its really time consuming.
I recently visited a studio where the engineer also uses the DM5,along with miced drums------------------I didnt really catch all he was saying-----------------but what he explained to me was that he used the dm5 after the fact----i presume he meant recording the drums miced--------the running into the dm5?
Todd---------------------please reply ------------------I have to finish the drum tracks by this weekend.

Guest Fri, 06/10/2005 - 16:58

Todzilla wrote: Run triggering off the rejecting mic tracks. If need be, you can EQ the signal between track and Trigger input. This gives you many more options that trying to capture MIDI data up front where you have to commit to threshold, retriggering settings up front.
I found the above approach to be far superior to committing to triggering up front.

If I use an Audix D6, or an AKG D112 to record the kick drum. Can I use that track to trigger the DM5? Or is a different mic gonna be better?
Second question...mic's can be used in place of triggers? Basically meaning "don't buy any triggers"? Yes or no

pr0gr4m Fri, 06/10/2005 - 17:26

its that guy again wrote:
If I use an Audix D6, or an AKG D112 to record the kick drum. Can I use that track to trigger the DM5? Or is a different mic gonna be better?
Second question...mic's can be used in place of triggers? Basically meaning "don't buy any triggers"? Yes or no

Yes. The DM5 or the D4 can be triggered by regular old audio. You could yell real loud into a mic and use that as a trigger. :D All you need is an XLR to 1/4 cable for the trigger inputs.

When you use audio as a trigger, you need to really work with the trigger input settings to eliminate false triggers and that sort of stuff. It makes it a bit tougher. If you have a guy who slams the snare drum, it will probably bleed through every mic and set off all the triggers on the machine. With triggers, it's much easier to eliminate that since they work off of vibration. There can still be some false triggers but usually much less.

I've actually taken recorded drum tracks, output the audio from each track individually and fed that into my D4. I record the MIDI data from the trigger into my DAW, then use that to trigger new sounds either via the D4 or Battery or whatever.

Back to the original post...

You say your drummer wants to use the triggers for recording. To me it sounds like he wants to use the sounds off of the DM5 as opposed to the natural sounds of his kit. If that is the case, and assuming he is a good drummer, then all you really need to record is the audio out of the DM5. However, that only gives you a stereo mix of the drums. You can alter them individually after recording.

I would record both the audio from the DM5 and the MIDI data from the triggers. Then I would run play back the MIDI data through the DM5 and record each drum individually. For example, set up the MIDI so that it is only transmitting the Kick drum notes. Record the output of the DM5 to a track and you'll have your Kick drum track. Do the same for the snare, toms, and whatever else.

It's a bit time consuming but it works.

anonymous Mon, 06/13/2005 - 07:21

pr0gr4m wrote: [quote=its that guy again]
If I use an Audix D6, or an AKG D112 to record the kick drum. Can I use that track to trigger the DM5? Or is a different mic gonna be better?
Second question...mic's can be used in place of triggers? Basically meaning "don't buy any triggers"? Yes or no

Yes. The DM5 or the D4 can be triggered by regular old audio. You could yell real loud into a mic and use that as a trigger. :D All you need is an XLR to 1/4 cable for the trigger inputs.

When you use audio as a trigger, you need to really work with the trigger input settings to eliminate false triggers and that sort of stuff. It makes it a bit tougher. If you have a guy who slams the snare drum, it will probably bleed through every mic and set off all the triggers on the machine. With triggers, it's much easier to eliminate that since they work off of vibration. There can still be some false triggers but usually much less.

I've actually taken recorded drum tracks, output the audio from each track individually and fed that into my D4. I record the MIDI data from the trigger into my DAW, then use that to trigger new sounds either via the D4 or Battery or whatever.

Back to the original post...

You say your drummer wants to use the triggers for recording. To me it sounds like he wants to use the sounds off of the DM5 as opposed to the natural sounds of his kit. If that is the case, and assuming he is a good drummer, then all you really need to record is the audio out of the DM5. However, that only gives you a stereo mix of the drums. You can alter them individually after recording.

I would record both the audio from the DM5 and the MIDI data from the triggers. Then I would run play back the MIDI data through the DM5 and record each drum individually. For example, set up the MIDI so that it is only transmitting the Kick drum notes. Record the output of the DM5 to a track and you'll have your Kick drum track. Do the same for the snare, toms, and whatever else.

It's a bit time consuming but it works.Youve answered my questions----------what i want to do is to record the drums with mics,then use the sends form each drum to trigger the dm5 as you have mentioned.----thanks

Todzilla Tue, 06/14/2005 - 13:58

I have been remiss on this thread.

Bottom line: I have a full set of drum triggers sitting in a box gathering dust. As long as I have sufficient tracks to put each drum-to-be-triggered on its own track, I just record for isolation, then trigger after the fact.

Not only can a D4 be triggered by regular old audio, I found that regular old audio works better than triggers, as long as you are diligently rejecting neighbor drums on each track, through judicious use of placement, mic selection, etc... In extreme cases you can put the audio into some tweaked out EQ to ensure it gets preferential treatment in the D4.

anonymous Tue, 06/14/2005 - 16:04

Todzilla wrote: I have been remiss on this thread.

Bottom line: I have a full set of drum triggers sitting in a box gathering dust. As long as I have sufficient tracks to put each drum-to-be-triggered on its own track, I just record for isolation, then trigger after the fact.

Not only can a D4 be triggered by regular old audio, I found that regular old audio works better than triggers, as long as you are diligently rejecting neighbor drums on each track, through judicious use of placement, mic selection, etc... In extreme cases you can put the audio into some tweaked out EQ to ensure it gets preferential treatment in the D4.

Got it-thanks--------Ill do almost anything to make drum tracking easier!

Guest Tue, 06/14/2005 - 17:55

Thanks man

Todzilla, you are the man! Thanks a lot. You helped me and probubly 3 others in 2 paragraphs. I had 2 or 3 post on various sites and you were the only one who knew "what was going on and how to explain it". Seems like alot of guys know how to do it but not how to explain "how to do it" very well.