Skip to main content

Just curious! Leave some eq as well! I'm trying to make my vocal recordings better and the more the merrier, and it can help the rest of you as well. Maybe find some idea that hey? I haven't heard that before!

Right now for a male voice I usually hi pass around 100Hz, compressions around 4.4:1, run a de-ess, and if I feel like it, sometimes I'll add my new plugin the Tube from Antares to dirty it up a little.

I still get some sticky notes though (notes that are much louder than others, especially the "e" vowel) that I can't really cure except by angling down the microphone from the performer's mouth.

But any of your experiences might help me solve that!

Comments

bent Fri, 02/08/2008 - 08:42

angling down the microphone from the performer's mouth.

I do that often, especially when I'm using Oktavas.
Either angled down or to one side...

The chain I've usually got goin' is Vipre - AD8000 - Protools.

Sometimes I insert an old DBX 160 (single channel) comp prior to the ADC, but not too often - I prefer to record the signal as direct as possible.

Davedog Fri, 02/08/2008 - 17:29

I'm gonna go with U87-->preamp dujour-->Alesis HD24. I monitor back through the Ghost and usually rely on the singer keeping a good level at the mic. I like to ride the fader after we have established how the song is being played out. This allows the singer to 'work' the mic and give me that goodoletimereligion feel.

For those stubborn artistes, the remote controlled shock collar is a blessing for the studio.

The preamp dujour can be several things depending upon who I can borrow from this week.....

If I had a ViPre, I would never unhook the Neumann from it....ever.

I have a particularly excellent sounding older U87 that recently spent a week in Klaus Heynes' lab getting polished and cleaned. So it really does sound good on anything its plugged into.

blaumph2cool Fri, 02/08/2008 - 21:39

I get killer vocals from the the following chain:
MXL 990 > Beh$#%ger tube amp > Alesis 3036 cranked all the way > SoundBlaster Audigy2.

Well just kidding, that vocal chain will literally kill you...or make you want to kill yourself.

My last setup went something like this:
AT4040 > Summit Audio 2B2-221 > ART VLA 3:1 (for just a bit of cohesion) > Fire Studio (bypassing buit-in pre's).

I always try to record vocals as clean as possible and any reverb/delay is added in the box. I hate to EQ alot in the box, so i try to get what i want by mic placement.

BDFitz Sun, 02/24/2008 - 20:54

Trying to find a few combos that satisfy my ear while still keeping the budget in line I've had great luck with the following:

TLM103 thru an Avalon M5 pre (both solid state)
Cascade v55 stereo pair (tubes) thru Trident S20 dual pre (SS)
TLM103 and a ribbon (Fathead II or Royer 121) in combo thru M5

All going thru Lynx Aurora A/D D/A

Getting a better result on the Cascade Fathead ribbon for vocals than the Royer. Bigger sweet spot. Using a Large Diaphragm for articulation and a ribbon for warmth, the blend is great, big and open.

If I had them I'd probably opt for a vintage U87 and a Manley or Viper Pre but newer technology does offer lower SNR and the Neumann M149 is another great modern mic.

x

User login