anonymous
28 July 2004
I have an oktava mk-012 and its got a lot of buzzing and noise when I hook it up with the phantom power. I switched the capsul with one that I know works correctly and still get the same problems which tells me the diaphram is fine. I know these mics are pretty cheap, but would getting it repaired be cheaper than getting a new one? Where can I go for mic repairs? I'm in the chicago area.
Topic Tags
Comments
repair If you don't have the troubleshoot skills, it might be w
repair
If you don't have the troubleshoot skills, it might be worth trying out the mods here:
http://www.tbrstudio.com/oktavamod.php
I'd start with the caps as they are really dodgy (remember to mod your other mk-12's too :)
Have you eliminated the possibility of a problem with the phantom power & cable? I know it wounds obvious but have to ask.
If all that fails check out Scott Dorseys mic mod - intended for cheap chinese mics but might be worth trying.
Alternately since it's a cheap mic - save the money on repair / moification and get another.
I'd be interested in repairing it but i'm in ireland and the postage would be excessive.
Actually if you so decide to get a new one I'd buy the old one off you if it was going cheap.
ANyway good luck,
Paddy