thepilgrimsdream
15 October 2010
So it looks like the aux outs only work in stereo pairs in the m-audio software mixer
1&2
3&4
5&6
7&8
I wish i could have have 8 separate headphone mixes, or atleast 6 and then my main playback monitors in stereo
Topic Tags
Comments
You should make your headphone mixes in whatever DAW you use. I
You should make your headphone mixes in whatever DAW you use. If that is PT-M that's great. Assign that bus/aux in the DAW to one of the analog outputs of the 2626 instead of the main bus. Then you will have as many HP mixes as you have line outs. Unless you are analog summing into a mixer on those 8 stems then they are ripe for this kind of use. Avoid mixing from the 2626 gui.
Are you talking about Protools or the interface? What interface
Are you talking about Protools or the interface? What interface are you using? The interface is what is going to limit your HP mixes. PT can mix as many auxiliary channels as you want.