You should have no problems updating to 5!

For anyone who may still use an ADAT in their recording setup:

Finally installed the LAWP 5 program. The program using the above software/hardware setup works fine with the ADAT. So far, there is solid sycnronization!

Thought I'd give you and update.

Just curious. How many of you still use the ADAT in some fashion??

Regards,

Ted Fiebke, RN

P. S. I love the LAWP 5 program. Glad they updated the automation setup.

Ted

Originally posted by Edward Fiebke:
For anyone who may still use an ADAT in their recording setup:

Finally installed the LAWP 5 program. The program using the above software/hardware setup works fine with the ADAT. So far, there is solid sycnronization!

Ted - what kind of sync - ASIO 2 (ADAT sync cable to an audio card)? or MTC (BRC to Midi interface)?

Regards,
Dedric

Dedric:

I sync the ADAT to computer using the MOTU 2408 and MOTU Midi Timepiece AV. The Midi Timepiece goes goes to the "Sync In" of the ADAT. The "Sync Out" of the ADAT goes to the 2408.

Unfortunately, I'm at work (I'm an ICU nurse who works nights at a small rural hospital) and can't give you details. If you are interested in a detailed set-up of this configuration, please let me know and I'll post the configuration when I get home.

I'm just happy the the whole set up syncs nicely.

Hope this helps.

Regards,

Ted

This is good news. It didn't work last I tested it (4.x?). I don't use my ADAT much anymore, but would love to sync it to my Paris rig via ADAT sync. It makes me wonder if Logic now supports sample accurate ASIO sync (assuming ASIO is actually synced to the ADAT timecode, rather than just the transport and using it the same way it would MTC).

Thanks,
Dedric