Hello I'm new to the forums and just purchased some low budget equipment recently. I do mostly Hip Hop vocals and a little bit of female recording. Anyways I have an Audiobox USB Interface and a Tube MP Studio Preamp. I'm running the newest RODE NT1 through the Tube and then to the the interface through the Mic inputs/outputs.

This is a bit of an odd one.
I had my system working fine for several years, then my PC motherboard died.
I bought a replacement PC and re-installed everything.
But I now have an odd problem.

For SOME (but not all) VSTs, every so often (and this varies from 1 second to 10 minutes) the volume on the instrument drops to zero.

Two times in the past week we had long discussions with our restoration clients about the projects they were bringing in. We finished up the project and burned the CDs and DVDs and then they decided that they wanted some major revisions. I guess I am trying to figure out what is the best way to handle this?

Andrew Scheps (Red Hot Chili Peppers, Adele, Metallica, Jay Z) returns to catch up with Dave.

Los Angeles, California, July 2015... When GRAMMY®-winning mix engineer Dave Pensado started using PreSonus® Sceptre S6 and S8 studio monitors, some of his friends were surprised.

Let me explain...
I decided to check how the latency was with the fireface 800 I just got.
I'm set at 512 and decide to do a round trip through my 2 LA-610.
The chain was, line out of the RME, line in of the LAs, AD96 and S/PDIF to the RME.
I took a drum sample that I played and recorded the re-amp version.

I did a test this morning.. I was wondering how different were the converters in my fireface 800 and my UA 4-710 (going to the RME with ADAT)

all comments appreciated!

http://recording.or…

Attached files float.mp3 (7.6 MB) 

I've never done this before but, I have a Nano Piano hooked up via Midi and it has analog outputs on the back. I have the analog outputs coming in via the hardware aux line 3, which is a stereo in on the M-Audio omni studio. The nano plays fine in logic and I can change the presets, but I can't get the analog audio (that I'm hearing) to go to logic's output channel for a bounce.

I thought I'd start a new thread, discussing songs we like and dissecting the recording and mixing methods used that lent heavily to the ultimate sound of the song.