Here ya go:

http://www.youtube…"]YouTube - ‪Lunchbox Symphonic - Dr.Mario‬‏[/]="http://www.youtube…"]YouTube - ‪Lunchbox Symphonic - Dr.Mario‬‏[/]

Hey guys diden't know where to post this so feel free to move it.

I was wondering if someone could help me with some information that I could not find in the manual. I currently use a Tascam dr-08 but I'm running in to a problem. perhaps the PCM-M10 would solve the problem...

I'd like to upgrade my DAW operating system from WinXP to Windows 7 and take advantage of the increased RAM capability. I would need to upgrade the motherboard and processor. However, I really do not want to, nor do I have the money to replace my 3 PCI interfaces with comparable PCIe interfaces. My experience has been that the most legacy PCI slots available on newer motherboards is 2.

Hi everyone,

I'm looking for schematics for a Scully 284B 8 track machine (circa 1976). These were the later model "California" Scullys and apparently differed from the earlier 280Bs. I realize this is a long shot as schematics for the California models seem to be very rare.

Thanks

Hi, basically, the story goes: I've got a copy of Cubase 5 and looking to record mainly guitar and bass on it (both electric). I will be adding drum tracks at a later date but will most likely program them. Now, I've managed to record a partial track using the on-board sound card and, as I'm sure you can imagine, its Godawful. I'm looking at getting a 'Alesis iO2 USB Audio Interface'.

Tracking Cello

hi I'm thinking about buying the Behringer Eurodesk SX2442FX and want your thoughts about this mixer.

thanks

Hey everyone I have a question and would like some opinions and thoughts on the idea. Since I've started my music production career,my studio has been mixer less, but now I'm looking to replace my M-Audio 2626 Audio Interface and a few PreSonus Studio Channels with 2 daisy chained PreSonus StudioLive 16.4.2 Digital Mixer's.

I have a Roland VDrums and I want to use MIDI to track my drums. Based on actual experience, what interface (hardware) can you recommend that have the least latency. I'm a Logic 8 user.