Hello, I've been using a Behringer B-1 for recording vocals for the past few years but some time ago, I invested in a RODE NT-1 which had been recommended by many. I'm sure it's an excellent microphone but I am having two regular problems with it.

First, there are 'pops' everywhere - beginning words especially but also in silent parts between lines.

I am trying to record my Line 6 Spider IV 320W combo amp by plugging it straight into my Focusrite Scarlett 2i2 USB interface from the Headphone/Out jack on the Line 6. I have actually, successfully recorded a few guitar parts in this way but it's really sketchy because it will randomly cut in & out.

Hello,

I have a very simple question about the levels in mixing, here it is;

A couple of weeks ago I had to upgrade from a 4 track Tascam Portastudio 414mk2 cassette to a Tascam DP03 digital recorder because I couldnt find new blank cassettes and I dont use ebay.So,I upgraded.Brought a brand new DP03.I have it set up with:
Roland RD700sx stage piano,
Roland KC350 amp and a
mic with XLR plug.

EDIT: I solved it myself after 4 months of this BS. If anybody else has this problem it's annoyingly easy to fix. Simply go into Mixcraft and click "Sound Device", then tick the box that says "Use High Priority Threads for Audio Engine". It solved both the guitar latency and the weird rotary effect.

I tried to export 4 mono guitar tracks, grouped, as a stereo audio file. The result was a file with no sound whatsoever. I've done this a million times before and never had this problem. What's happening? The group track is stereo and was, as is normal, soloed for the bounce. It produced a wave file with no wave. I'm baffled. I also tried to bounce them to the stereo outputs. no joy.

Hi all and thanks in advance for your help!

So, today I started my home music production career :D and I bought myself an M-Audio Avid recording studio, very simple to plug and set-up got myself into playing 5 minutes after. The only problem that I have is that when I use guitar rig 5 there's an intermittent sound when it starts usually at 512 samples which makes me put it up to 2048 samples and increase the delay up to 100 ms.

Hello, just a new beginner starting off with a home studio.

I downloaded Mixcraft to put on the PC and attached an AT4040 microphone via the Icicle XLR to USB converter, and tried recording some audio. Both the computer and Mixcraft recognize the Icicle.

I have recently bought an M-Audio Solaris and am experiencing some real problems with the output of the microphone. I am running it through a Line 6 kb37 (with 48V phantom power ON) into either POD farm and/or Studio One 2 and I am getting next to no response volume from the mic when everything is set up (track is armed and monitored).