My Yamaha hs50 monitors are producing a fuzz noise when my computer is on. The speakers are fine cuz they work when connected to my laptop through a pci express card. They are connected to a Focusrite saffire pro 24. The noise gets louder when i scroll up and down web pages. I have everything plugged into a conditioner.

I recently purchased an inexpensive little set up to practice and do some recording in a small room in my home. I have a Pyle Pro PTA1000 dual channel stereo amp. Each channel runs to one Pyle Pro padh1269 600WATT speaker in a standard single left and right configuration. The speakers are hooked up to the amp via a big gauge Speakon cable.

I am new to this and have a quick question...we just got a Behringer PMP2000 power mixer and two Behringer b212XL speakers. The back of the PMP2000 has three "Speakon" outputs: Left (Main); Bridge; and Right (Monitor).

Hello everybody,

Hello all,

I just wanted to ask if TRS cables are the exactly the same as "Speaker Cables?" Speaker cables that you would normally use to hook your studio monitors to your audio interface.

Also, are these the same cables that should be used between a guitar amp head and the cabinet?

Thanks for the advice!

I want to switch between three or four speakers using only one amp.

Okay, let me start this off by saying I'm broke. That being said, I just bought a pair of Samson Media One 3a speakers for my home studio. I also have the Logitech X-220. So the thing about the Samsons is they lack a bunch in the low end as expected. But the problem with the Logitechs was they were lacking in the mids, which is definitely the Samsons strong suit.

Hi colleagues:

I just purchased a Tascam DR-100. Seems like a good unit as I'm going over the manual and doing some first tests. But my manual didn't come with a troubleshooting guide to answer this potential issue: The built-in speaker doesn't seem to work. Headphones work fine, though.

I double-checked the following:

Slightly confusing issue (to me at least!) regarding audio and a cable change. I would really appreciate any help on the cause of the following problem and any offers of how to fix in FCP.

Test 1 has the problem and test 2 is fine.

I am reading about surround sound.

I understand that reverb/delay and the db level of a sound generator object give the spatial characteristic of depth in the process of mixing.