Now here's a question I would love an answer to:
I own a Mac G4/533, and have my Digi 001 connected. Because of this, I have a lead running from the audio out of the G4 to the digi 001, which ten routes to my speakers - this means that if I want to hear system sounds etc I just press the monitor mode button and it comes through my speakers. BUT - it only comes through my left speaker which means it is mono. HOwever, if I were to connect the lead direct from the G4 to the speakers it would be stereo...
Any ideas? I have the lead going into both the L and R ports on one of the digi 001 channels so it has me stumped...
Dave
Topic Tags
Comments
yes you are right opus, I have the stereo RCA plugs going from 3
yes you are right opus, I have the stereo RCA plugs going from 3 and 4 to my monitors.
to answer the query on what sort of leads - I use stereo RCA leads between my G4 and chans 3 and 4 on digi, and same deal between digi and monitors. I obviously use adapters on the ends of RCA leads, but they are stereo as well.
Dave
What are you using to split the signal into L/R? Be specific.
What are you using to split the signal into L/R? Be specific.