Skip to main content

Wiring Neutrik Combo Connectors

Member for

21 years 2 months

I'm getting ready to solder up some Neutrik combo plugs (NCJ6FI-S) with Mogami W2534 cable. With these combo plugs do you run jumpers from the 1,2,3 terminals to the Tip,ring sleeve terminals T,R,S. And if so, using the quad wire should I use a single wire or double wire jumper. As for the shield and ground should these be jumped as well, with the ground then going to the steel UPC module box that these combo's are being mounted in.

Any help would be appreciated.

Thank you
Tom F