Genesys Black The Ultimate Hybrid Workstation

You guys see this? Might be great for our power hungry DSP stuff, and more reliable than audio gridder, while being simpler than VEP.

This hasn't happened, however, I was wondering: Suppose I have a powered speaker, like Yamaha, QSC, etc. The amp in the speaker dies, or stops working for whatever reason. If that were to happen, could the speaker be powered via an external amp, and be used like a normal passive speaker? 

Hi, I have an Alesis MultiMix 4 mixer and a single QSC CP8 speaker. The manual for the mixer says to use 1/4 TRS for the main outs. And the speaker has a female XLR input. So my question is, if I only have one speaker, should I get a dual 1/4" TRS cable that terminates at the other end as a male XLR? Is that the proper connection when I only have one speaker?

Does anyone know if there are any modern devices that do the same thing as the Roland SD-35 MIDI player? It was a great piece of hardware for playing general MIDI files. If not, what is the best way to play GM files via a Windows laptop with a good quality sound module?

We are building a new studio in an existing building....a 2 storey garage....studio will be in first level....13 ft 6 in ceilings....1000 sq. ft :

Hey,

I hope this is the right place to ask this question..

so I got a new Motu M2 Interface about a month ago. Since then there are periodic buzzing sounds coming from the Headphone Amps at "random" times. Sometimes it runs 3 hours without a Problem and sometimes the buzzing happens twice in 5 minutes. Turning the Interface off and on again "fixes" the buzzing temporarily.

 Recording Drum Room Mics: Mid/Side Configuration