Skip to main content

Grace 101 and Earthworks QTC40 Problem

Don't know if this is the right section for this, but I'm having a noise problem recording with the QTC40 and Grace preamp. Thought maybe I could skip testing some parts of the recording chain if I describe the problem in enough detail. Using 5 mics with this project, when the Grace input began to make some noise, then the signal disappeared altogether. Simple enough, eh?

active monitor fuse problems

Hi again.. Recently there was a problem with the electricity lines outside my house sparks flying off it which then blew a fuse at the outside pole cutting of power to my house.Ive got a small recording studio away from it and when the power came back on I checked to see if my equipment was ok it was except my active monitors which didn't come on.

mic in put problem

Forums

Hi All,Im a newbie here looks like a great site. Ive got the Tascam DP-24 DAW and have a problem with the mic input. Having plugged it in to the input and shouting into the mic so it doesn't clip for some reason with everything turned off trim channel fader and mains fader if I tap the mic it registers on the channel so any advice why that happens Thanks

Samplitude Pro X2 is coming in December

They are hoping to release it in December which for N. American mean shore side in January. At the same time it is released with all of its new features, Sequoia 13 will also have a patch (free 13.1 probably) with all of the new features too.

Samplitude is as always ahead of the competition and Magix will not reveal any new ProX2 features to keep it that way.