Sorry, didn't mean to double post... :p

:w: Bob/boB :w:

Has anybody tried one of these things?

I'm non-DAW (I use a DA7/Mx2424 set up),
and could occasionally use something like this...

I have a sampling K2000, which could probably work,
but it isn't really something I grab when I need
to quickly manipulate a sample...

TIA,

Bob Phillips
20to20soundesign

I just got the asus p4b533 with the built-in promise raid 133. I am going to run two hard drives for audio on the raid.

should i go for the maxtor 80 gigs which run at ata133, or the western digital 80 gig which only runs at ata100, but has the 8mb buffer?

Would the bigger buffer give me more performance? or the true ata133 speed of the maxtor?

Greetings,

Greetings,

Greetings,

Top engineer available for Pro Tools lessons/consultation. I have worked with many Grammy winning artists.
thanks,
Jamie

email: jamieboss1@hotmail.com

resume: http://www.commonthreads.cc/jamie.html

Anyone had any experience with these mics? Any opinons and observations would be greatly appreciated. Thanks!

:confused: I have just recently built a project studio in a 2000 sqr/ft lot. The partition wall between my studio and the shop next (I am in a strip mall ) was said to be 14" wide - staggererd studs 5/8 drywall with insulation. To achieve an STC of 55 we built on accordingly. As it turns out the wall between me and the next door is roughly 8" - not on staggered studs but with insulation.

Here's a great (I'n my humble opinion) tip I stole from Val Garay.

Val by the way is a great (one of the greats) engineer...and a world class asshole (that's why I don't care about "stealling" this tip).

This is for basic tracks and beyond, and it invloves the monitor ballance. It goes like this: