Hello experts,

I am reading an article I can't quite understand, regarding something called "muffling".

My question is. Whats muffling? is it a circuit or piece of electronics inside the microphone? is it a physical isolating mount or fabric inside the microphone's housing?

This is what it says:

I'm told by the Sennheiser distributor there are currently no stocks of 416 windsocks. RODE 's WSVM accessory windsock, compatible with the NTG1 & 2 and Videomic according to their website, looks like it might fit. However they don't seem to sell one compatible with the NTG3 which I gather is their direct competition to the 416.

Hi all and thank you for having me on the forum at recording.org. This query will no doubt seem strange compared to most of the requests you have on here however we have been tasked with setting up a conferencing suite in a new office based in Nottingham. They use an HP laptop to run gotomeeting which is outputted through 3 60 inch Tvs.

I build LoFi microphones, if you follow the link below you can hear examples.

take care

Looking for a mic with a bump around 1-3k. Looking to "emulate" the pop of a V30 on certains amps that are not so equipped.

I have a Mackie 802 VLZ3 8 channel mixer. It has three mic inputs, however I need to add a fourth. What do I need to do to add a fourth mic input with only three available? Thanks.

Hello friends

would like to record specific audio for the following scenario. I have a piece of equipment that rotates a drum via an electric motor. The drum contains food product that is heated by air entering the drum. The food inside the drum cracks very lightly when it is fully cooked. The problem is that the cracks are audible, but barely.

Hi I am using magix music maker, a fast track mbox, and a Shure microphone on my laptop. I recorded in stereo and I can only get playback on the left side. I then recorded in mono and will only get playback in the left side. Completely puzzled tried just about everything can only get it to record on the left side. Any cheap programs I can get so I that I will not run into this problem?

Hi!

Yesterday I got a huge micstand from superlux, the ms200. I mainly got this since I don't get normal stands to where I want the overheads when recording drums and to get more distance between drums and mics to gain more space to the drums.