I got it yesterday. I am impressed. A nice peice of gear. very quiet operation. nice sounding pres. Better A/D. head and shoulders above the PreSonus digimax which I have listed on ebay...http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7325852940

I'm looking at purchasing a pair of Yamaha NS 10 speakers, however I am confused at the difference between the Original NS 10M Speakers and the NS 10MS (Studio). I have read that the tweeter was replaced, with a more 'softer' sounding tweeter? Is the woofer still that same?

What do you feel is the better of the models? Any information on these speakers if greatly appreciated.

I need a cheap (<$200) hardware reverb for live acoustic guitar and voice. I just bought an Alesis Nanoverb for $50. Turned out to be WAY too cheap. Sounds not much better than the Radio Shack reverb I had in 1983.

How about the cheap Lexicon models? Sound OK? I'm not too demanding; I just need a decent Hall or Plate that doesn't sound like a tin can, man.

Thanks,

I'll record a friend next weekend and just found out that there is no 456 anymore in town, I'll have to use GP9 or cancel the session cause I can't get my machine rebiased (a fostex g24s, 1")

What will happen if i'm using the wrong tape? I'm recording something noisy, ambient, so I don't need super clean sterile sounds

any advices? thanks

I run a studio in the philadelphia area called gradwell house recording - gradwellhouse.com

We have 6 channels of Neotek Series 1 preamps racked and 2 of the channels are giving us some issues.

We are looking to find a tech in our area to take a look at them.

Please let me know.

Thanks,
Dave

Just seeing if anyone has bought or checked out the new Virus TI ? From what I've seen online lt looks pretty bad ass . thinking of getting one to use with Logic ...

I have been asked to retrofit a TRS snake with an ELCO connector for an old Soundcraft 2400 board.
The schematics I received from soundcraft show the pin configuration. It says, "View from solder pin side of free connector".

Thinking whether i should upgrade my MacOS from 10.3 to 10.4 or not. My setup is: Logic Pro 6.4, RME 9652, UAD-1, TC Powercore. I assume there would be no compatibility-problems but I might aswell check first since my computer is troublefree and smooth at the moment. Any OS 10.4 users out there ? What would I gain by upgrading ?

Another HD-280 question!

Is there any difference between these headphones? Is the silver version the same, but sprayed with silver paint. The specs seem to be similar, but they are advertised as different headphones.

Thanks
John Stafford

And this multieffects unit is. .a VAMP2.
Yeah yeah yeah, I know. But its used at church where we are fighting stage volume issues. Here's the deal-