Hi,

I currently use a UA Solo 610, Focusrite ISA One and PreSonus Eureka in my studio.
These are all capable of different colors and all sound great.
However, all my pres are transformer type pres and apparently this adds something to the sound?

Ok so I've ran into this problem ever time I've made a movie. I will eventually run into working on a day where the wind sucks and totally distorts the audio. The bad thing is it is present all over the audio. I always have to cut a ton of low end and doctor the rest so at least some is audible. Then I use a reverb to at least widen the little audio I still have.

I am a aspiring musician, now want to start the recording on a small scale in my home. I want to do voice recording also in my home itself. My home is not sound proofed or sound treated as in the studio's. Can i pursue recordig in this mode with high(Superb) quality of the mix?

Hi colleagues:

I just purchased a Tascam DR-100. Seems like a good unit as I'm going over the manual and doing some first tests. But my manual didn't come with a troubleshooting guide to answer this potential issue: The built-in speaker doesn't seem to work. Headphones work fine, though.

I double-checked the following:

I'm new to setting up gear and I'm trying to figure out how to set up my board to my computer so I can record 8 tracks into pro tools, then play back from pro tools and mix on my board.

Hi all,

I hope you are all well.

Just thought I would see if anybody could tell me if it would be ok to use a Samson Servo 200 amp with a pair of Yamaha NS10s?

I know everyone recommends - Bryston, Hafler & Crown but I have a Samson Servo 200 and was wondering if the spec is ok and won't cause any problems.

Hi,

Hi,
I have a dilemma which i can't seem to get my head around so maybe someone can help me here.

Slightly confusing issue (to me at least!) regarding audio and a cable change. I would really appreciate any help on the cause of the following problem and any offers of how to fix in FCP.

Test 1 has the problem and test 2 is fine.

Hi everyone,

Brief Question first: UA Solo/610 or the Saffire 56

My Setup:
Two Mackie MR8 monitors coming from the Line Out on onboard soundcard
One ART Tube Amp preamp into Line In on onboard soundcard
Microphones: Beyer-Dynamic M160 M260 M201, SM57, Audix D6, Audio-Technica ATM25