Is this all in EQ? For example, the open Low E, as well as many other notes are dwarfed in comparison to the 4th and 5th frets on the Low E. These ones rock the subwoofer and then makes the other notes seem puny. Is there any remedy for this? Thanks.

In SONY Sound Forge, I'm using the Pitch Bend effect to make many adjustments to a vocal track, but I need to SIMULTANEOUSLY listen to the backing instrumental track to ajust the vocal. How can I listen to 2 audio tracks at the same time while adjusting only one of them?

I don't know if anyone could help me on this. .but I've had this old mixer and extender sitting in my basement for a few years. I decided to put it on Craigslist, but I have no idea what it is worth. and can't find ANYTHING about it on the interweb. I thought it wasn't worth much, so I put it up for $50. .within an hour I already had a bunch of interested buyers emailing me.

Hi guys, I have a really annoying problem with my bass strings and was hoping someone could give me some advice.

I play in a modern hard rock band, it sounds really heavy and aggressive and I tune my 5 string, like the guitar players, in D flat, like this:

5-Bb
4-Db
3-Ab
2-Db
1-Gb

Hello, i've searched for a way to solve this issue, the only that came up that had an issue similar to mine, the person said they just installed the newest update and everything was fine. so i did that and i still have the same problem.

When recording vocals, I often hear that the music in the backround is very bad quality.

How can I record my vocals, while haveing good backround music?

Do I need a speacial program to record the music in the backround?

Do I let the mic record my voice and the backround music?

Thanks for the help
-Dari123<3

I'm going to try doing it, using direct in through my firepod on electric guitars / bass, then modeling through guitar rig. For acoustic guitar / vocals I would use an NT2-A. So far the audio recording seems pretty damn good, and the fact that I have good EQ, real time plugins, and much better options than Adobe Audition 1.5 that I was using before, I'm hoping it will improve my stuff.

So I'm producing this song for my band using Logic Studio. I'm trying to create what my guitarist and I refer to as a 'wind fade' to fade in his guitar solo. If you're curious as to what I'm referring to listen to 6:48 of Master Of Puppets to hear how Hetfield's voice comes in. It almost sounds like the first note he sings is stretched out prior to him actually singing it, but it's not.

Hello to all in Recording.org Forum!

I am really new in this forum and I want to ask if someone worked already with this combo:

RME Fireface 800 + Dell Inspiron 1520

Storage Space Required - 3658.4 MB (3.57 GB)
This is the approximate amount of disk space 3 minutes of 37 track uncompressed WAV audio requires at 192 k / 24 bits.

Data Rate - 1219.48 MB/minute (20812.46 KB/second)
This is the total data rate of 37 track uncompressed WAV audio at 192 k / 24 bits.

So what equipment do I need for this?