The phantom power on our new mixer is on or off for all channels. The only dynamic mics we use are 57's.
Is it ok to use them with phantom power on or do we need a seperate pp before the condensers hit the mixer. thanks in advance.

Hi, I'm new to the mac world.I'll be buying the new power mac G5 but which one you recommend for my application?

I'm looking for new power amp to upgrade from my 'old' Crown DC300A.
A friend gave me a good price for Chevin and Hafler series.
How do you guys rate this Chevin? is it worthy as mastering amp?

Many thanks in advance...

Hi!

What's the major difference between a guitar cable and a power cable(that runs the power signal from the amp to the speakers)?
The impedance? What should be to both?

Keep on,
Murdock

Here's what I got so far:

The most important thing is not to let the amp start clipping, because then you get all this extra high-frequency energy which is really destructive to voice coils and so forth. Much more important than the max power rating, since an amp rarely gets turned up all the way anyway...

Hi, does anybody know how i can rescue some audio files that, while recording, suddenly the computer shutdown.

Is the power supply located inside the unit or is the power supply expernal on these preamps?

So there's one and only one thing in the studio here that introduces ground hum.

A power supply for a tube mic.

Everything's on one isolated circuit BTW.

A 3 to 2 prong ground lift adapter will silence this nutty piece o' hummin gear, but is it safe? (This mic will be used for a D/I'd electric guitarist who will be simulaneously playing and singing).

hello this is my new post here :)

Hi. I recently moved to a new place with a terrible 60~ hum.

This is not a problem with any wiring I did... this is a problem in the house. I get a hum simply from plugging just about anything into the wall, especially a guitar amp. But I can even hear a slight hum from my computer being plugged in.. so its pretty bad.