Hey guys, this is my first post, and i would just like to commend recording.org and its staff for being an awesome resource all round. thanks again.
Anyways on to my question. i just recently bought a Digidesign 002rack and a Digidesign control 24. As you already probably know the 002rack only supports 8 channels of analog audio input. but it also supports 8 more channels though its ADAT lightpipe. i have been doing some research and i have stumbled across the Alesis AI-3 analog to lightpipe converter. i have read up on this piece of equipment, and have found that some ppl are less then happy with its performance, so i was just wondering if you guys had some recommendations or other options in mind. .any help will be appriciated. .thanks again
Topic Tags
Comments
Boswell wrote: Depends on what features you want and how much yo
Boswell wrote: Depends on what features you want and how much you are prepared to spend. At the bottom end (for much less money than the AI-3) is the Behringer ADA8000, and you get passable microphone pre-amps built-in. A bit up in price is the Creamware A16 Ultra. This box has got a good name, has 16 channels (2 ADAT ports) or can run at 96KHz on 8 channels, but it takes high-level inputs only (like the AI-3). If you want to spend more money than this in the hope of getting higher quality, there are several ways to go. I suggest you come back with a budget and we can make further suggestions.
I'm not sure those ada8000's have bypassable mic pre's. I own one and from everything I've read and everything everyone's told me the pre's cannot be bypassed. You can turn the gain down for less of the signature Behri sound but you can't bypass the pre's.
I'm not sure those ada8000's have bypassable mic pre's. I own on
I'm not sure those ada8000's have bypassable mic pre's. I own one and from everything I've read and everything everyone's told me the pre's cannot be bypassed. You can turn the gain down for less of the signature Behri sound but you can't bypass the pre's.
Using the "line in" 1/4" plugs bypasses the preamps, to the ADAT port out.
Using the ADAT in, analog audio come out of the XLRs out in the back, with no path through the preamps.
The ADA8000 uses Alesis enc/dec chips, they have no other choice as Alesis owns the patent!!!!!
I'm using the ADAT out of my PT192 HD to the ADA8000, to my monitor section.
Yes, the ADA8000 has line ins on 1/4" TRS jacks and these bypass
Yes, the ADA8000 has line ins on 1/4" TRS jacks and these bypass the microphone pre-amps.
The ADA8000 is one of the better items of Behringer gear for the money, but one trick they missed is a switch to loop the ADAT outs electronically back to the ADAT ins so it could be used as an analog pre-amp. You can do this using an optical cable, but not if you want to use the optical out for feeding a mixer or hard disk recorder.
jonnyc posted: Tue May 23, 2006 4:37 pm Post subject: Does yo
jonnyc posted: Tue May 23, 2006 4:37 pm Post subject:
Does you're gain knob control the 1/4" inputs? If so then I'm pretty sure it's preamp'd.
Ah, I see what you are asking now. In the ADA8000, the TRS line inputs have an attenuator pad and then feed into the same input stage as the XLR inputs. My misunderstanding of the question, sorry.
I've got a side question about the ADA8000 I'd like to use it t
I've got a side question about the ADA8000
I'd like to use it to give 8 more inputs into my 896, but I would also like to zero latency monitor with it. I got the idea to use this: here
Send one out to the 896, the other back into the ADA8000. I feel that I am missing something though. Has anyone tried this? It would make the Behringer a lot more attractive.
jonnyc wrote: Does you're gain knob control the 1/4" inputs? If
jonnyc wrote: Does you're gain knob control the 1/4" inputs? If so then I'm pretty sure it's preamp'd.
you are correct
here is an accurate (as far as I know) representation of the insides of the ADA8000
http://www.gyraf.dk/schematics/Behringer_ada8000_analouge.PDF
I think it is a worthwhile budget unit and do use them
I also have an Ai3 and use it as a Keyboard return
I'd like to use it to give 8 more inputs into my 896, but I woul
I'd like to use it to give 8 more inputs into my 896, but I would also like to zero latency monitor with it. I got the idea to use this: here
Send one out to the 896, the other back into the ADA8000. I feel that I am missing something though. Has anyone tried this? It would make the Behringer a lot more attractive.
Yes, you can do this, although I have never used the Dayton device. You have to check that an optical splitter box designed for S/PDIF does not attenuate the optical signals so much that the receivers can't get enough signal, as they are already working at their limits at the 13Mbps ADAT bit rate.
See my earlier post about increasing the usefulness of the ADA8000:
The ADA8000 is one of the better items of Behringer gear for the money, but one trick they missed is a switch to loop the ADAT outs electronically back to the ADAT ins so it could be used as an analog pre-amp. You can do this using an optical cable, but not if you want to use the optical out for feeding a mixer or hard disk recorder.
Depends on what features you want and how much you are prepared
Depends on what features you want and how much you are prepared to spend. At the bottom end (for much less money than the AI-3) is the Behringer ADA8000, and you get passable microphone pre-amps built-in. A bit up in price is the Creamware A16 Ultra. This box has got a good name, has 16 channels (2 ADAT ports) or can run at 96KHz on 8 channels, but it takes high-level inputs only (like the AI-3). If you want to spend more money than this in the hope of getting higher quality, there are several ways to go. I suggest you come back with a budget and we can make further suggestions.