Hello,

I'm just about ready to upgrade to a second, more current DAW. Any thoughts on dual processor vs a single 1.7 or higher CPU ? DDR Ram ? Any particular motherboards hot @ the moment?

I will be building a Nuendo system (which specifically mentions dual processor) and want to run VST insts. and plugs as smoothly as possible.

Greetings:

I have a couple of questions and from the few posts I have read I am sure I will get some assistance here.

How good are the converters in the Layla 20? Ate they as good as th ones in the Yam aw4416? I know that one is 20 bite 128 x oversampled and the other 24 bits 64 x oversampled. Does the oversampled spec make a major difference...

Hi, I need help for getting a subwoofer to upgrade my powered Yamaha's MSP5's, I need a powered sub that has high pass outputs to my monitors, since they dont have a low cut switch. Thanks

I recently purchased an M80 mic preamp but have not yet received it. What should I expect? this is a used unit with the "Jensen" transformers. Is this a pretty good pre for general purpose. I'm tracking through my D8B right now. Will it be much of an improvement? I also ordered an RME AD8 Pro to use as converters. I would also like some feedback on True Systems Precison 8.

After the release of PT/HD I am interested in stuff in the following order..

Hi guys

Lately I have quite some jazz bands and of course it's kind of 'live' recording.

The only problem I have is the upright bass, the bands don't like to have the bassist in a separate room and I must admit they play better when they all are in one room.

Hi Guys: I can't figure this one out. Please help me. My set up is: d8b,lucid genx6,lucid A/D9624, and a 2408. My problem: I'm getting noise on the left side of the S/PDIF input on the 2408(S/PDIF 1). Spdif 2 works perfectly. It's not the A/D9624. I can take the S/PDIF out of the 9624 and go to a DAT and it's clean. I can also take the AES/EBU out and that is clean.

I'm looking to purchase a video card for my new DAW. I really only want/need 1 monitor. Everyone seems to agree that the Matrox g450 is the best solution for dual monitors, but what about a single display card?

Hey, Greg - Sounds like you may be able to point me in the right direction - I don't use PT, having started with Samplitude, but I need to pick your brain slightly on where to find a good source of info on putting together the additional gear to expand my DAW with the goal of writing for film and video.

Any one using Waveframe DX/7 or Frameworks?

Opinions on this DAW will be appreciated.

thanks.