Skip to main content

I have the digi design Mbox and a Berhinger UB2222FX-PRO mixer and I have no friggin clue how to connect this stuff can someone please help and tell me what cables to buy and stuff

Comments

anonymous Sun, 03/20/2005 - 15:33

you really shouldnt need to use a mixer with the m-box. I dont own an m-box but from what i know it has focusrite preamps already in it. You can run your microphone or insturments directly into the m-box then rite into your computer. Running it through a mixer just adds more signal path, which is degrading the signal. I would just scratch the mixer and just run the m-box for preamp and conversion.

anonymous Wed, 03/23/2005 - 13:18

so then you are going to be mixing down before your mbox, which means you'll only have two channels in protools and will not be able to do much with it after the fact. if that makes sense to you and that's what you want to do, then all you need is a pair of TRS cables to plug from the output of your mixer and plug those into the mbox set to line inputs.

Ben