Ok this is my question :
i m recording 3 amps for one take ( guitar signal splitter ), each cabinet mic ed by a sm57, ok now there is the question, how can i ( before recording ) be sure about no phase problem between the 3 mics?

I'm curious about this little preamp. Given the hype surrounding the wonderful DAC-1 at the moment, I was just wondering if they could produce another budget miracle.

Thanks
John Stafford

Hi all,

I have come to a realization that I was never taught properly (or found an manual in the mic box) how to read the capsules on the SM69. All I know is the bottom capsule is system I and the top is system II. What exactly does all those dots mean? Thanks!

~D.

Hi everyone. My question is if I have not so great drums and no specific booth to put them in and I just have SM57s through a digi002, what can i do to get the best sound i can. Any Help would be great.

I recorded my Yamaha baby grand the other night and the mics were picking up too much of the dampers. I used one SM81 pointed a little in front of the dampers an octave below middle C 3 ft back, another 81 pointed past the dampers an octave below middle C about 5 feet back, and a Royer R121 about 4 feet from the second 81 to pick up the whole piano. Any mic position tips you guys could offer?

i have a band coming in, i was wondering if any body knew how i could just connect an amp head direct to the house then to a track on the computer... my main delema: if i connect it from the output on the amp.. will the signal be too high or amperage to high that it will blow out my board?

thanx
andy

I'm going through the mics, trying to fill holes. Here's what I have:

D112
RE20
421 (4)
57s (lots)
414 (pair)
BLUE Mouse
BLUE Ball
441
451 (w/ CK1 cap - pair)
Earthworks SRO (pair)
Crown PZM (the good one - I forget the model)
Beta 57A

Looking for any ideas on what type of mic is good for an instrument like the Pipe Organ?

//Janne

Hi Folks,
Has anyone hear got any info on the following mike as for recording
uses ?

SENNHEISER MD 21

I need to purchase a mic case (for protecting my mic's going to gigs) for appox 12 to 15 microphones. Maybe as many as 25 mic's, or I could just buy two cases.
I looked at the usual places. I'm not too crazy about the ATA stuff or the SKB cases for mic's.
I would like some sort of hard shell design. And I like the silver finish, sort of like a metal looking swirl design.